Liquid Flashing Sealant

Save 20%



Price:
$77.99 $97.99

Description

The Most Versatile Liquid Sealant!

"This is a fantastic product. By far the easiest way to flash a window or door opening and get a 100% air and water-tight seal. Also very helpful for sealing any difficult penetrations through your wall sheathing. Takes the place of flashing tape.- Mason Collins

Why Buy Our Liquid Flashing Sealant?

✅EFFECTIVE: Liquid Flashing Sealant will provide an air and water-tight seal for your home or building. It bonds to most building materials such as concrete, wood, and architectural metal. It can even bond to dry or damp surfaces which will help you apply it on irregularly shaped surfaces or shapes.

✅DURABLE: Because of the silicone and urethane combination and STPE technology, this liquid flashing sealant can withstand up to 180 days of extreme weather and UV exposure. It is not recommended you go over this duration as the product will start to lose its effectiveness. This product is compatible with most urethane, silicone, and acrylic sealants.

✅EASY APPLICATION: Ensure the panels are free of any dirt, debris, or oily films. Apply the Liquid Flashing Sealant into the joint and ½” on either side of it then using a spreader, spread the liquid sealant onto it until you can no longer see the material you’re sealing beneath.

❗ Reminder ❗

  • Only use in buildings of Type III (roof only) and V (roof and wall) construction or construction permitted under the International Residential Code.
  • Any gaps that exceed 1/4" should be filled with expandable foam insulation, backer rod, or fiber-reinforced gap filler prior to the application of the Liquid Flashing Sealant.
  • Ambient and panel surface temperatures should be between 35°F (2°C) and 110°F (43°C) during application and drying. If air or surface temperatures exceed 95°F (35°C), apply to shaded surfaces before daytime air and surface temperatures reach their peak.
  • Do not exceed 180 days of weather exposure.
  • Do not dilute or alter. No mixing is required.
  • Do not use it as a structural sealant or adhesive.
  • Do not use in place of appropriate through-wall flashing.
  • Do not use below-grade or in locations that are continuously immersed in water.
  • Do not apply to surfaces with standing water or frost.
  • Does not come with a caulking gun.

📋Frequently Asked Questions:

Q: What is the shelf life of this product?

A: The shelf life for this product is 12 months.

Q: How long can the sausage be stored open in the gun?

A: Liquid Flash Sealant is a moisture-cured product; therefore, the product will begin to cure once it is exposed. One benefit of using the sausage pack is that you can simply cut off the cured portion of the tube and use any remaining material.

    GET YOURS NOW!




    Payment & Security

    American Express Diners Club Discover Mastercard PayPal Shop Pay Venmo Visa

    Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

    Customer Reviews

    Based on 10 reviews
    90%
    (9)
    10%
    (1)
    0%
    (0)
    0%
    (0)
    0%
    (0)
    N
    Nicholas R.
    Best flashing material I've used on windows

    Easy to use with a sausage gun, can spread it thin and it's very effective on pretty much any surface. This is my go-to for flashing. Just wear gloves and have a solvent available for cleanup, it's very messy if you're not careful.

    B
    Bradley K.
    Protected my home!

    My house flooded back in May so during the repairs the liquid flash was used where the slap and sheathing met and up the joints about 1.5ft. Only a few gallons got in last night around some sand less bags we used at the doors. But I am very proud of this Liquid Flashing Sealant.

    M
    Mathias N.
    Great flash sealant

    The sausage tube generates less waste than the two sizes of caulking tubes available. Using the fluid applied flashing is cheap insurance against water intrusion. Using it around windows and doors eliminates the need for tape and stretch tape along with layering that can cause installation issues if not done exactly. The liquid applied approach is a one step rough opening water resistant barrier method.

    S
    Simon K.
    Worked in extreme temps

    I used this in Nebraska in June which was high 80s and 90s temps over two weekends and pretty humid. No issues with not sticking. I did sand the old panels with a power sander where this stuff was going so I could remove all the peeling paint and have a good surface for it to adhere to. Stuff is very sticky.

    A
    Adam
    Great Liquid Flash

    It's working great. The consistency is good and dries perfectly.